( pcb2gcode 1.2.2 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
S10000 ( RPM spindle speed. )
G64 P0.05080 ( set maximum deviation from commanded toolpath )
F600.00000 ( Feedrate. )

F600.00000 ( Feedrate. )
M3 ( Spindle on clockwise. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X3.87739 Y78.52820 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X3.87739 Y78.52820
X3.62339 Y78.47740
X3.59799 Y78.42660
X3.26779 Y78.27420
X3.03919 Y78.04560
X2.98839 Y78.04560
X2.98839 Y77.99480
X2.75979 Y77.76620
X2.60739 Y77.43600
X2.55659 Y77.41060
X2.53119 Y77.23280
X2.42959 Y76.97880
X2.40419 Y76.72480
X2.42959 Y76.03900
X2.53119 Y75.78500
X2.55659 Y75.60720
X2.60739 Y75.58180
X2.75979 Y75.25160
X2.98839 Y75.02300
X2.98839 Y74.97220
X3.03919 Y74.97220
X3.26779 Y74.74360
X3.59799 Y74.59120
X3.62339 Y74.54040
X3.80119 Y74.51500
X4.05519 Y74.41340
X4.30919 Y74.38800
X4.99499 Y74.41340
X5.24899 Y74.51500
X5.42679 Y74.54040
X5.45219 Y74.59120
X5.78239 Y74.74360
X6.01099 Y74.97220
X6.06179 Y74.97220
X6.06179 Y75.02300
X6.29039 Y75.25160
X6.44279 Y75.58180
X6.49359 Y75.60720
X6.51899 Y75.78500
X6.62059 Y76.03900
X6.64599 Y76.29300
X6.62059 Y76.97880
X6.51899 Y77.23280
X6.49359 Y77.41060
X6.44279 Y77.43600
X6.29039 Y77.76620
X6.06179 Y77.99480
X6.06179 Y78.04560
X6.01099 Y78.04560
X5.78239 Y78.27420
X5.45219 Y78.42660
X5.42679 Y78.47740
X5.24899 Y78.50280
X4.99499 Y78.60440
X4.74099 Y78.62980
X4.05519 Y78.60440
X3.87739 Y78.52820
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X19.82859 Y72.68620 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X19.82859 Y72.68620
X19.82859 Y70.88280
X22.03839 Y70.88280
X22.03839 Y72.78780
X19.82859 Y72.78780
X19.82859 Y72.68620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X20.28579 Y70.14620 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X20.28579 Y70.14620
X20.00639 Y69.94300
X19.85399 Y69.61280
X19.82859 Y69.13020
X19.87939 Y68.87620
X19.98099 Y68.74920
X20.00639 Y68.64760
X20.18419 Y68.49520
X20.23499 Y68.49520
X20.28579 Y68.41900
X20.56519 Y68.34280
X21.30179 Y68.34280
X21.53039 Y68.39360
X21.70819 Y68.54600
X21.75899 Y68.54600
X21.86059 Y68.64760
X21.88599 Y68.74920
X21.98759 Y68.87620
X22.03839 Y69.13020
X22.01299 Y69.61280
X21.86059 Y69.94300
X21.68279 Y70.09540
X21.63199 Y70.09540
X21.58119 Y70.17160
X21.30179 Y70.24780
X20.56519 Y70.24780
X20.33659 Y70.19700
X20.28579 Y70.14620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X20.28579 Y67.60620 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X20.28579 Y67.60620
X20.00639 Y67.40300
X19.85399 Y67.07280
X19.82859 Y66.59020
X19.87939 Y66.33620
X19.98099 Y66.20920
X20.00639 Y66.10760
X20.10799 Y66.00600
X20.23499 Y65.95520
X20.28579 Y65.87900
X20.56519 Y65.80280
X21.30179 Y65.80280
X21.53039 Y65.85360
X21.63199 Y65.95520
X21.75899 Y66.00600
X21.86059 Y66.10760
X21.88599 Y66.20920
X21.98759 Y66.33620
X22.03839 Y66.59020
X22.01299 Y67.07280
X21.86059 Y67.40300
X21.75899 Y67.50460
X21.63199 Y67.55540
X21.58119 Y67.63160
X21.30179 Y67.70780
X20.56519 Y67.70780
X20.33659 Y67.65700
X20.28579 Y67.60620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X41.18999 Y65.19320 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X41.18999 Y65.19320
X41.18999 Y63.13580
X43.34899 Y63.13580
X43.34899 Y65.29480
X41.18999 Y65.29480
X41.18999 Y65.19320
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X41.74879 Y67.73320 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X41.74879 Y67.73320
X41.57099 Y67.65700
X41.36779 Y67.47920
X41.18999 Y67.07280
X41.18999 Y66.43780
X41.36779 Y66.03140
X41.69799 Y65.77740
X42.05359 Y65.67580
X42.63779 Y65.70120
X43.04419 Y65.90440
X43.22199 Y66.10760
X43.34899 Y66.43780
X43.34899 Y67.07280
X43.17119 Y67.47920
X42.96799 Y67.65700
X42.63779 Y67.80940
X42.05359 Y67.83480
X41.79959 Y67.78400
X41.74879 Y67.73320
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X39.94539 Y53.33140 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X39.94539 Y53.33140
X39.86919 Y53.28060
X39.84379 Y53.17900
X39.84379 Y52.89960
X39.89459 Y52.79800
X39.89459 Y47.69260
X39.84379 Y47.59100
X39.84379 Y47.31160
X39.86919 Y47.21000
X40.02159 Y47.08300
X40.37719 Y47.05760
X40.52959 Y47.13380
X40.60579 Y47.21000
X40.63119 Y47.31160
X40.63119 Y47.59100
X40.58039 Y47.69260
X40.58039 Y52.79800
X40.63119 Y52.89960
X40.63119 Y53.17900
X40.55499 Y53.33140
X40.37719 Y53.43300
X40.09779 Y53.43300
X39.97079 Y53.38220
X39.94539 Y53.33140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X56.20139 Y50.28340 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X56.20139 Y50.28340
X56.12519 Y50.23260
X56.09979 Y50.13100
X56.09979 Y49.85160
X56.15059 Y49.72460
X56.35379 Y49.59760
X56.63319 Y49.59760
X56.70939 Y49.64840
X66.43759 Y49.64840
X66.51379 Y49.59760
X66.79319 Y49.59760
X66.92019 Y49.64840
X67.02179 Y49.75000
X67.04719 Y49.85160
X67.02179 Y50.23260
X66.92019 Y50.33420
X66.79319 Y50.38500
X66.51379 Y50.38500
X66.43759 Y50.33420
X56.70939 Y50.33420
X56.63319 Y50.38500
X56.35379 Y50.38500
X56.22679 Y50.33420
X56.20139 Y50.28340
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X55.33779 Y45.68600 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X55.33779 Y45.68600
X55.15999 Y45.63520
X55.13459 Y45.58440
X54.98219 Y45.50820
X54.75359 Y45.25420
X54.62659 Y44.97480
X54.57579 Y44.72080
X54.57579 Y44.18740
X54.62659 Y43.93340
X54.75359 Y43.65400
X55.00759 Y43.37460
X55.05839 Y43.37460
X55.08379 Y43.32380
X55.26159 Y43.22220
X55.49019 Y43.14600
X56.20139 Y43.12060
X56.65859 Y43.27300
X57.01419 Y43.57780
X57.16659 Y43.85720
X57.21739 Y44.03500
X57.24279 Y44.72080
X57.19199 Y44.97480
X57.06499 Y45.25420
X56.81099 Y45.53360
X56.76019 Y45.53360
X56.55699 Y45.68600
X56.32839 Y45.76220
X55.61719 Y45.78760
X55.38859 Y45.73680
X55.33779 Y45.68600
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X55.33779 Y40.68220 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X55.33779 Y40.68220
X55.26159 Y40.68220
X55.08379 Y40.58060
X55.05839 Y40.52980
X55.00759 Y40.52980
X54.80439 Y40.32660
X54.62659 Y39.97100
X54.57579 Y39.71700
X54.57579 Y39.18360
X54.62659 Y38.92960
X54.75359 Y38.65020
X55.00759 Y38.37080
X55.05839 Y38.37080
X55.08379 Y38.32000
X55.26159 Y38.21840
X55.49019 Y38.14220
X56.20139 Y38.11680
X56.65859 Y38.26920
X57.01419 Y38.57400
X57.16659 Y38.85340
X57.21739 Y39.03120
X57.24279 Y39.71700
X57.19199 Y39.97100
X57.06499 Y40.25040
X56.81099 Y40.52980
X56.42999 Y40.73300
X56.20139 Y40.78380
X55.61719 Y40.78380
X55.38859 Y40.73300
X55.33779 Y40.68220
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X55.36319 Y35.37360 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X55.36319 Y35.37360
X55.15999 Y35.27200
X55.03299 Y35.14500
X54.98219 Y34.99260
X54.85519 Y34.84020
X54.80439 Y34.53540
X54.80439 Y34.20520
X54.85519 Y33.90040
X54.90599 Y33.87500
X55.03299 Y33.59560
X55.36319 Y33.34160
X55.69339 Y33.26540
X56.27759 Y33.29080
X56.63319 Y33.44320
X56.78559 Y33.59560
X56.91259 Y33.87500
X56.96339 Y33.90040
X57.01419 Y34.20520
X57.01419 Y34.53540
X56.96339 Y34.84020
X56.91259 Y34.86560
X56.78559 Y35.14500
X56.63319 Y35.29740
X56.48079 Y35.34820
X56.45539 Y35.39900
X56.12519 Y35.47520
X55.69339 Y35.47520
X55.36319 Y35.37360
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X54.80439 Y32.83360 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X54.80439 Y32.83360
X54.80439 Y30.72540
X57.01419 Y30.72540
X57.01419 Y32.93520
X54.80439 Y32.93520
X54.80439 Y32.83360
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X60.36699 Y43.17140 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X60.36699 Y43.17140
X60.18919 Y43.12060
X59.96059 Y42.94280
X59.78279 Y42.73960
X59.65579 Y42.46020
X59.60499 Y42.20620
X59.60499 Y41.67280
X59.68119 Y41.34260
X59.78279 Y41.13940
X60.03679 Y40.86000
X60.08759 Y40.86000
X60.29079 Y40.70760
X60.51939 Y40.63140
X61.23059 Y40.60600
X61.68779 Y40.75840
X62.04339 Y41.06320
X62.19579 Y41.34260
X62.24659 Y41.52040
X62.27199 Y42.20620
X62.22119 Y42.46020
X62.09419 Y42.73960
X61.84019 Y43.01900
X61.45919 Y43.22220
X61.23059 Y43.27300
X60.64639 Y43.27300
X60.41779 Y43.22220
X60.36699 Y43.17140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X60.39239 Y55.87140 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X60.39239 Y55.87140
X60.31619 Y55.82060
X60.29079 Y55.71900
X60.29079 Y55.43960
X60.31619 Y55.33800
X60.41779 Y55.23640
X60.54479 Y55.18560
X60.82419 Y55.18560
X60.90039 Y55.23640
X72.53359 Y55.23640
X72.60979 Y55.18560
X72.88919 Y55.18560
X73.01619 Y55.23640
X73.11779 Y55.33800
X73.14319 Y55.43960
X73.11779 Y55.82060
X73.01619 Y55.92220
X72.88919 Y55.97300
X72.60979 Y55.97300
X72.53359 Y55.92220
X60.90039 Y55.92220
X60.82419 Y55.97300
X60.54479 Y55.97300
X60.41779 Y55.92220
X60.39239 Y55.87140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X74.18459 Y71.31460 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X74.18459 Y71.31460
X74.18459 Y69.20640
X76.39439 Y69.20640
X76.39439 Y71.41620
X74.18459 Y71.41620
X74.18459 Y71.31460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X77.28339 Y71.31460 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X77.28339 Y71.31460
X77.08019 Y71.21300
X76.95319 Y71.08600
X76.90239 Y70.93360
X76.77539 Y70.78120
X76.72459 Y70.47640
X76.72459 Y70.14620
X76.77539 Y69.84140
X76.82619 Y69.81600
X76.95319 Y69.53660
X77.28339 Y69.28260
X77.61359 Y69.20640
X78.19779 Y69.23180
X78.55339 Y69.38420
X78.70579 Y69.53660
X78.83279 Y69.81600
X78.88359 Y69.84140
X78.93439 Y70.14620
X78.93439 Y70.47640
X78.88359 Y70.78120
X78.83279 Y70.80660
X78.70579 Y71.08600
X78.55339 Y71.23840
X78.40099 Y71.28920
X78.37559 Y71.34000
X78.04539 Y71.41620
X77.61359 Y71.41620
X77.28339 Y71.31460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X94.96179 Y68.11420 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X94.96179 Y68.11420
X94.68239 Y67.91100
X94.52999 Y67.58080
X94.50459 Y67.09820
X94.55539 Y66.84420
X94.65699 Y66.71720
X94.68239 Y66.61560
X94.78399 Y66.51400
X94.91099 Y66.46320
X94.96179 Y66.38700
X95.24119 Y66.31080
X95.97779 Y66.31080
X96.20639 Y66.36160
X96.38419 Y66.51400
X96.43499 Y66.51400
X96.53659 Y66.61560
X96.56199 Y66.71720
X96.66359 Y66.84420
X96.71439 Y67.09820
X96.68899 Y67.58080
X96.53659 Y67.91100
X96.35879 Y68.06340
X96.30799 Y68.06340
X96.25719 Y68.13960
X95.97779 Y68.21580
X95.24119 Y68.21580
X95.01259 Y68.16500
X94.96179 Y68.11420
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X94.96179 Y65.57420 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X94.96179 Y65.57420
X94.68239 Y65.37100
X94.52999 Y65.04080
X94.50459 Y64.55820
X94.55539 Y64.30420
X94.65699 Y64.17720
X94.68239 Y64.07560
X94.78399 Y63.97400
X94.91099 Y63.92320
X94.96179 Y63.84700
X95.24119 Y63.77080
X95.97779 Y63.77080
X96.20639 Y63.82160
X96.30799 Y63.92320
X96.43499 Y63.97400
X96.53659 Y64.07560
X96.56199 Y64.17720
X96.66359 Y64.30420
X96.71439 Y64.55820
X96.68899 Y65.04080
X96.53659 Y65.37100
X96.43499 Y65.47260
X96.30799 Y65.52340
X96.25719 Y65.59960
X95.97779 Y65.67580
X95.24119 Y65.67580
X95.01259 Y65.62500
X94.96179 Y65.57420
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X94.50459 Y63.03420 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X94.50459 Y63.03420
X94.50459 Y61.23080
X96.71439 Y61.23080
X96.71439 Y63.13580
X94.50459 Y63.13580
X94.50459 Y63.03420
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X94.50459 Y54.04260 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X94.50459 Y54.04260
X94.50459 Y51.93440
X96.71439 Y51.93440
X96.71439 Y54.14420
X94.50459 Y54.14420
X94.50459 Y54.04260
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X92.04079 Y53.50920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X92.04079 Y53.50920
X91.78679 Y53.38220
X91.65979 Y53.25520
X91.48199 Y52.84880
X91.48199 Y52.21380
X91.65979 Y51.80740
X91.98999 Y51.55340
X92.34559 Y51.45180
X92.92979 Y51.47720
X93.33619 Y51.68040
X93.51399 Y51.88360
X93.64099 Y52.21380
X93.64099 Y52.84880
X93.46319 Y53.25520
X93.25999 Y53.43300
X92.92979 Y53.58540
X92.34559 Y53.61080
X92.09159 Y53.56000
X92.04079 Y53.50920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X88.94199 Y53.50920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X88.94199 Y53.50920
X88.94199 Y51.45180
X91.10099 Y51.45180
X91.10099 Y53.61080
X88.94199 Y53.61080
X88.94199 Y53.50920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X95.06339 Y51.50260 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X95.06339 Y51.50260
X94.86019 Y51.40100
X94.73319 Y51.27400
X94.68239 Y51.12160
X94.55539 Y50.96920
X94.50459 Y50.66440
X94.50459 Y50.33420
X94.55539 Y50.02940
X94.60619 Y50.00400
X94.73319 Y49.72460
X95.06339 Y49.47060
X95.39359 Y49.39440
X95.97779 Y49.41980
X96.33339 Y49.57220
X96.48579 Y49.72460
X96.61279 Y50.00400
X96.66359 Y50.02940
X96.71439 Y50.33420
X96.71439 Y50.66440
X96.66359 Y50.96920
X96.61279 Y50.99460
X96.48579 Y51.27400
X96.33339 Y51.42640
X96.18099 Y51.47720
X96.15559 Y51.52800
X95.82539 Y51.60420
X95.39359 Y51.60420
X95.06339 Y51.50260
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X95.87619 Y78.52820 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X95.87619 Y78.52820
X95.62219 Y78.47740
X95.59679 Y78.42660
X95.26659 Y78.27420
X95.03799 Y78.04560
X94.98719 Y78.04560
X94.98719 Y77.99480
X94.75859 Y77.76620
X94.60619 Y77.43600
X94.55539 Y77.41060
X94.52999 Y77.23280
X94.42839 Y76.97880
X94.40299 Y76.72480
X94.42839 Y76.03900
X94.52999 Y75.78500
X94.55539 Y75.60720
X94.60619 Y75.58180
X94.75859 Y75.25160
X94.98719 Y75.02300
X94.98719 Y74.97220
X95.03799 Y74.97220
X95.26659 Y74.74360
X95.59679 Y74.59120
X95.62219 Y74.54040
X95.79999 Y74.51500
X96.05399 Y74.41340
X96.30799 Y74.38800
X96.99379 Y74.41340
X97.24779 Y74.51500
X97.42559 Y74.54040
X97.45099 Y74.59120
X97.78119 Y74.74360
X98.00979 Y74.97220
X98.06059 Y74.97220
X98.06059 Y75.02300
X98.28919 Y75.25160
X98.44159 Y75.58180
X98.49239 Y75.60720
X98.51779 Y75.78500
X98.61939 Y76.03900
X98.64479 Y76.29300
X98.61939 Y76.97880
X98.51779 Y77.23280
X98.49239 Y77.41060
X98.44159 Y77.43600
X98.28919 Y77.76620
X98.06059 Y77.99480
X98.06059 Y78.04560
X98.00979 Y78.04560
X97.78119 Y78.27420
X97.45099 Y78.42660
X97.42559 Y78.47740
X97.24779 Y78.50280
X96.99379 Y78.60440
X96.73979 Y78.62980
X96.05399 Y78.60440
X95.87619 Y78.52820
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X95.87619 Y6.51920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X95.87619 Y6.51920
X95.62219 Y6.46840
X95.59679 Y6.41760
X95.26659 Y6.26520
X95.03799 Y6.03660
X94.98719 Y6.03660
X94.98719 Y5.98580
X94.75859 Y5.75720
X94.60619 Y5.42700
X94.55539 Y5.40160
X94.52999 Y5.22380
X94.42839 Y4.96980
X94.40299 Y4.71580
X94.42839 Y4.03000
X94.52999 Y3.77600
X94.55539 Y3.59820
X94.60619 Y3.57280
X94.75859 Y3.24260
X94.98719 Y3.01400
X94.98719 Y2.96320
X95.03799 Y2.96320
X95.26659 Y2.73460
X95.59679 Y2.58220
X95.62219 Y2.53140
X95.79999 Y2.50600
X96.05399 Y2.40440
X96.30799 Y2.37900
X96.99379 Y2.40440
X97.24779 Y2.50600
X97.42559 Y2.53140
X97.45099 Y2.58220
X97.78119 Y2.73460
X98.00979 Y2.96320
X98.06059 Y2.96320
X98.06059 Y3.01400
X98.28919 Y3.24260
X98.44159 Y3.57280
X98.49239 Y3.59820
X98.51779 Y3.77600
X98.61939 Y4.03000
X98.64479 Y4.28400
X98.61939 Y4.96980
X98.51779 Y5.22380
X98.49239 Y5.40160
X98.44159 Y5.42700
X98.28919 Y5.75720
X98.06059 Y5.98580
X98.06059 Y6.03660
X98.00979 Y6.03660
X97.78119 Y6.26520
X97.45099 Y6.41760
X97.42559 Y6.46840
X97.24779 Y6.49380
X96.99379 Y6.59540
X96.73979 Y6.62080
X96.05399 Y6.59540
X95.87619 Y6.51920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X49.77519 Y8.44960 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X49.77519 Y8.44960
X49.57199 Y8.34800
X49.44499 Y8.22100
X49.39419 Y8.06860
X49.26719 Y7.91620
X49.21639 Y7.61140
X49.21639 Y7.28120
X49.26719 Y6.97640
X49.31799 Y6.95100
X49.44499 Y6.67160
X49.77519 Y6.41760
X50.10539 Y6.34140
X50.68959 Y6.36680
X51.04519 Y6.51920
X51.19759 Y6.67160
X51.32459 Y6.95100
X51.37539 Y6.97640
X51.42619 Y7.28120
X51.42619 Y7.61140
X51.37539 Y7.91620
X51.32459 Y7.94160
X51.19759 Y8.22100
X51.04519 Y8.37340
X50.89279 Y8.42420
X50.86739 Y8.47500
X50.53719 Y8.55120
X50.10539 Y8.55120
X49.77519 Y8.44960
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X49.21639 Y10.98960 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X49.21639 Y10.98960
X49.21639 Y8.88140
X51.42619 Y8.88140
X51.42619 Y11.09120
X49.21639 Y11.09120
X49.21639 Y10.98960
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X45.15239 Y10.98960 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X45.15239 Y10.98960
X45.15239 Y8.88140
X47.36219 Y8.88140
X47.36219 Y11.09120
X45.15239 Y11.09120
X45.15239 Y10.98960
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X45.71119 Y8.44960 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X45.71119 Y8.44960
X45.50799 Y8.34800
X45.38099 Y8.22100
X45.33019 Y8.06860
X45.20319 Y7.91620
X45.15239 Y7.61140
X45.15239 Y7.28120
X45.20319 Y6.97640
X45.25399 Y6.95100
X45.38099 Y6.67160
X45.71119 Y6.41760
X46.04139 Y6.34140
X46.62559 Y6.36680
X46.98119 Y6.51920
X47.13359 Y6.67160
X47.26059 Y6.95100
X47.31139 Y6.97640
X47.36219 Y7.28120
X47.36219 Y7.61140
X47.31139 Y7.91620
X47.26059 Y7.94160
X47.13359 Y8.22100
X46.98119 Y8.37340
X46.82879 Y8.42420
X46.80339 Y8.47500
X46.47319 Y8.55120
X46.04139 Y8.55120
X45.71119 Y8.44960
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X23.13059 Y13.19940 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X23.13059 Y13.19940
X23.05439 Y13.14860
X23.02899 Y13.04700
X23.02899 Y12.76760
X23.05439 Y12.66600
X23.15599 Y12.56440
X23.28299 Y12.51360
X23.56239 Y12.51360
X23.63859 Y12.56440
X31.48719 Y12.56440
X31.56339 Y12.51360
X31.84279 Y12.51360
X31.96979 Y12.56440
X32.07139 Y12.66600
X32.09679 Y12.76760
X32.07139 Y13.14860
X31.96979 Y13.25020
X31.84279 Y13.30100
X31.56339 Y13.30100
X31.48719 Y13.25020
X23.63859 Y13.25020
X23.56239 Y13.30100
X23.28299 Y13.30100
X23.15599 Y13.25020
X23.13059 Y13.19940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X21.30179 Y15.38380 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X21.30179 Y15.38380
X21.20019 Y15.30760
X21.17479 Y14.92660
X21.20019 Y14.82500
X21.30179 Y14.72340
X21.42879 Y14.67260
X21.70819 Y14.67260
X21.78439 Y14.72340
X29.88699 Y14.69800
X30.01399 Y14.74880
X30.11559 Y14.85040
X30.14099 Y14.95200
X30.11559 Y15.33300
X30.01399 Y15.43460
X29.88699 Y15.48540
X29.60759 Y15.48540
X29.48059 Y15.40920
X21.78439 Y15.40920
X21.70819 Y15.46000
X21.42879 Y15.46000
X21.30179 Y15.38380
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X22.29239 Y19.98120 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X22.29239 Y19.98120
X22.29239 Y18.17780
X24.50219 Y18.17780
X24.50219 Y20.08280
X22.29239 Y20.08280
X22.29239 Y19.98120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X22.74959 Y22.52120 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X22.74959 Y22.52120
X22.47019 Y22.31800
X22.31779 Y21.98780
X22.29239 Y21.50520
X22.34319 Y21.25120
X22.44479 Y21.12420
X22.47019 Y21.02260
X22.57179 Y20.92100
X22.69879 Y20.87020
X22.74959 Y20.79400
X23.02899 Y20.71780
X23.76559 Y20.71780
X23.99419 Y20.76860
X24.09579 Y20.87020
X24.22279 Y20.92100
X24.32439 Y21.02260
X24.34979 Y21.12420
X24.45139 Y21.25120
X24.50219 Y21.50520
X24.47679 Y21.98780
X24.32439 Y22.31800
X24.22279 Y22.41960
X24.09579 Y22.47040
X24.04499 Y22.54660
X23.76559 Y22.62280
X23.02899 Y22.62280
X22.80039 Y22.57200
X22.74959 Y22.52120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X22.74959 Y25.06120 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X22.74959 Y25.06120
X22.47019 Y24.85800
X22.31779 Y24.52780
X22.29239 Y24.04520
X22.34319 Y23.79120
X22.44479 Y23.66420
X22.47019 Y23.56260
X22.57179 Y23.46100
X22.69879 Y23.41020
X22.74959 Y23.33400
X23.02899 Y23.25780
X23.76559 Y23.25780
X23.99419 Y23.30860
X24.09579 Y23.41020
X24.22279 Y23.46100
X24.32439 Y23.56260
X24.34979 Y23.66420
X24.45139 Y23.79120
X24.50219 Y24.04520
X24.47679 Y24.52780
X24.32439 Y24.85800
X24.22279 Y24.95960
X24.09579 Y25.01040
X24.04499 Y25.08660
X23.76559 Y25.16280
X23.02899 Y25.16280
X22.80039 Y25.11200
X22.74959 Y25.06120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X21.65739 Y30.97940 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X21.65739 Y30.97940
X21.58119 Y30.92860
X21.55579 Y30.82700
X21.55579 Y30.54760
X21.58119 Y30.44600
X21.68279 Y30.34440
X21.80979 Y30.29360
X22.08919 Y30.29360
X22.16539 Y30.34440
X27.82959 Y30.34440
X27.90579 Y30.29360
X28.18519 Y30.29360
X28.31219 Y30.34440
X28.41379 Y30.44600
X28.43919 Y30.54760
X28.41379 Y30.92860
X28.31219 Y31.03020
X28.18519 Y31.08100
X27.90579 Y31.08100
X27.82959 Y31.03020
X22.16539 Y31.03020
X22.08919 Y31.08100
X21.80979 Y31.08100
X21.68279 Y31.03020
X21.65739 Y30.97940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X16.06939 Y33.01140 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X16.06939 Y33.01140
X15.99319 Y32.96060
X15.96779 Y32.85900
X15.96779 Y32.57960
X16.01859 Y32.47800
X16.01859 Y28.38860
X15.96779 Y28.28700
X15.96779 Y28.00760
X15.99319 Y27.90600
X16.14559 Y27.77900
X16.50119 Y27.75360
X16.70439 Y27.88060
X16.75519 Y28.00760
X16.75519 Y28.28700
X16.70439 Y28.38860
X16.70439 Y32.47800
X16.75519 Y32.57960
X16.75519 Y32.85900
X16.72979 Y32.96060
X16.62819 Y33.06220
X16.50119 Y33.11300
X16.22179 Y33.11300
X16.09479 Y33.06220
X16.06939 Y33.01140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.18039 Y38.26920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.18039 Y38.26920
X15.18039 Y36.46580
X17.39019 Y36.46580
X17.39019 Y38.37080
X15.18039 Y38.37080
X15.18039 Y38.26920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.63759 Y40.80920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.63759 Y40.80920
X15.35819 Y40.60600
X15.20579 Y40.27580
X15.18039 Y39.79320
X15.23119 Y39.53920
X15.33279 Y39.41220
X15.35819 Y39.31060
X15.45979 Y39.20900
X15.58679 Y39.15820
X15.63759 Y39.08200
X15.91699 Y39.00580
X16.65359 Y39.00580
X16.88219 Y39.05660
X16.98379 Y39.15820
X17.11079 Y39.20900
X17.21239 Y39.31060
X17.23779 Y39.41220
X17.33939 Y39.53920
X17.39019 Y39.79320
X17.36479 Y40.27580
X17.21239 Y40.60600
X17.11079 Y40.70760
X16.98379 Y40.75840
X16.93299 Y40.83460
X16.65359 Y40.91080
X15.91699 Y40.91080
X15.68839 Y40.86000
X15.63759 Y40.80920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.63759 Y43.34920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.63759 Y43.34920
X15.35819 Y43.14600
X15.20579 Y42.81580
X15.18039 Y42.33320
X15.23119 Y42.07920
X15.33279 Y41.95220
X15.35819 Y41.85060
X15.45979 Y41.74900
X15.58679 Y41.69820
X15.63759 Y41.62200
X15.91699 Y41.54580
X16.65359 Y41.54580
X16.88219 Y41.59660
X16.98379 Y41.69820
X17.11079 Y41.74900
X17.21239 Y41.85060
X17.23779 Y41.95220
X17.33939 Y42.07920
X17.39019 Y42.33320
X17.36479 Y42.81580
X17.21239 Y43.14600
X17.11079 Y43.24760
X16.98379 Y43.29840
X16.93299 Y43.37460
X16.65359 Y43.45080
X15.91699 Y43.45080
X15.68839 Y43.40000
X15.63759 Y43.34920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.63759 Y45.88920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.63759 Y45.88920
X15.35819 Y45.68600
X15.20579 Y45.35580
X15.18039 Y44.87320
X15.23119 Y44.61920
X15.33279 Y44.49220
X15.35819 Y44.39060
X15.53599 Y44.23820
X15.58679 Y44.23820
X15.63759 Y44.16200
X15.91699 Y44.08580
X16.65359 Y44.08580
X16.88219 Y44.13660
X16.98379 Y44.23820
X17.11079 Y44.28900
X17.21239 Y44.39060
X17.23779 Y44.49220
X17.33939 Y44.61920
X17.39019 Y44.87320
X17.36479 Y45.35580
X17.21239 Y45.68600
X17.11079 Y45.78760
X16.98379 Y45.83840
X16.93299 Y45.91460
X16.65359 Y45.99080
X15.91699 Y45.99080
X15.68839 Y45.94000
X15.63759 Y45.88920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.18039 Y24.93420 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.18039 Y24.93420
X15.18039 Y23.13080
X17.39019 Y23.13080
X17.39019 Y25.03580
X15.18039 Y25.03580
X15.18039 Y24.93420
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.63759 Y22.39420 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.63759 Y22.39420
X15.35819 Y22.19100
X15.20579 Y21.86080
X15.18039 Y21.37820
X15.23119 Y21.12420
X15.33279 Y20.99720
X15.35819 Y20.89560
X15.45979 Y20.79400
X15.58679 Y20.74320
X15.63759 Y20.66700
X15.91699 Y20.59080
X16.65359 Y20.59080
X16.88219 Y20.64160
X16.98379 Y20.74320
X17.11079 Y20.79400
X17.21239 Y20.89560
X17.23779 Y20.99720
X17.33939 Y21.12420
X17.39019 Y21.37820
X17.36479 Y21.86080
X17.21239 Y22.19100
X17.11079 Y22.29260
X16.98379 Y22.34340
X16.93299 Y22.41960
X16.65359 Y22.49580
X15.91699 Y22.49580
X15.68839 Y22.44500
X15.63759 Y22.39420
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X15.63759 Y19.85420 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X15.63759 Y19.85420
X15.35819 Y19.65100
X15.20579 Y19.32080
X15.18039 Y18.83820
X15.23119 Y18.58420
X15.33279 Y18.45720
X15.35819 Y18.35560
X15.45979 Y18.25400
X15.58679 Y18.20320
X15.63759 Y18.12700
X15.91699 Y18.05080
X16.65359 Y18.05080
X16.88219 Y18.10160
X16.98379 Y18.20320
X17.11079 Y18.25400
X17.21239 Y18.35560
X17.23779 Y18.45720
X17.33939 Y18.58420
X17.39019 Y18.83820
X17.36479 Y19.32080
X17.21239 Y19.65100
X17.11079 Y19.75260
X16.98379 Y19.80340
X16.93299 Y19.87960
X16.65359 Y19.95580
X15.91699 Y19.95580
X15.68839 Y19.90500
X15.63759 Y19.85420
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X3.87739 Y6.51920 ( rapid move to begin. )
F300.00000
G01 Z-0.05000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F600.00000
X3.87739 Y6.51920
X3.62339 Y6.46840
X3.59799 Y6.41760
X3.26779 Y6.26520
X3.03919 Y6.03660
X2.98839 Y6.03660
X2.98839 Y5.98580
X2.75979 Y5.75720
X2.60739 Y5.42700
X2.55659 Y5.40160
X2.53119 Y5.22380
X2.42959 Y4.96980
X2.40419 Y4.71580
X2.42959 Y4.03000
X2.53119 Y3.77600
X2.55659 Y3.59820
X2.60739 Y3.57280
X2.75979 Y3.24260
X2.98839 Y3.01400
X2.98839 Y2.96320
X3.03919 Y2.96320
X3.26779 Y2.73460
X3.59799 Y2.58220
X3.62339 Y2.53140
X3.80119 Y2.50600
X4.05519 Y2.40440
X4.30919 Y2.37900
X4.99499 Y2.40440
X5.24899 Y2.50600
X5.42679 Y2.53140
X5.45219 Y2.58220
X5.78239 Y2.73460
X6.01099 Y2.96320
X6.06179 Y2.96320
X6.06179 Y3.01400
X6.29039 Y3.24260
X6.44279 Y3.57280
X6.49359 Y3.59820
X6.51899 Y3.77600
X6.62059 Y4.03000
X6.64599 Y4.28400
X6.62059 Y4.96980
X6.51899 Y5.22380
X6.49359 Y5.40160
X6.44279 Y5.42700
X6.29039 Y5.75720
X6.06179 Y5.98580
X6.06179 Y6.03660
X6.01099 Y6.03660
X5.78239 Y6.26520
X5.45219 Y6.41760
X5.42679 Y6.46840
X5.24899 Y6.49380
X4.99499 Y6.59540
X4.74099 Y6.62080
X4.05519 Y6.59540
X3.87739 Y6.51920

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z10.000 ( retract )

M5 ( Spindle off. )
M9 ( Coolant off. )
M2 ( Program end. )